Available for any tapered propeller shaft from 35mm to 65mm, from 1 ¼" to 2 1/2"
Max Prop Boomerang®
The Max Prop® Boomerang® propeller is an Easy model propeller equipped with a patented inner device which has the function of automatically and immediately return the blades to the feathering/flag position when the engine, which is turning in the forward direction, stops. Unique in its kind, it allows the blades to be positioned in the feathering position even if the boat is stationary and without having to block the rotation of the propeller shaft. Therefore, even with hydraulic transmission it is not necessary to install any brake on the axle. The Max Prop® Boomerang® propeller is particularly suitable for racing as it ensures that the propeller is in the feathering position before the boat reaches the starting line.
- Design with attention to every detail
- Minimum resistance when sailing (Low Drag Propeller)
- Unsurpassed maneuverability. The blades rotate mechanically maintaining the same thrust profile and, therefore, maximum efficiency, both in forward and reverse gear, with the least lateral movement of the vessel.
- It is delivered ready to be installed on the propeller shaft (already assembled, greased and with the pitches already set)
- Extremely easy and fast to install, even with the boat in the water
- Forward and reverse pitches are independent of each other
- Possibility of very fine and precise pitch regulation, with variations of 0.5 degrees. The variation is very simple and can also be done in the water.
- Reliability and unlimited life. It does not require any particular maintenance, over the years you only need to lubricate the propeller and replace the zinc anode.
- Easy to remove from the propeller shaft, even after years of use
Max Prop Easy installation video